Epilog Fusion m2 32 Laser

Epilog Fusion m2 32 Laser

Epilog's top-of-the-line laser engraving and cutting System

fusion m2 32 Laser Overview

The Fusion M2 32 and the large NEW Fusion M2 40!
It's our new concept in laser system design, featuring:
  • 32" x 20" or 40" x 28" engraving area
  • Our new standard for motion control design
  • Better flame-polished edge cuts
  • Our highest engraving and cutting speeds
  • Large viewing door with LED lighting
  • Dual source (fiber and CO2) and camera options available.
With a large table size of 32" x 20" (812 x 508 mm), the Fuson M2 32 is our newest product offering! The high quality engraving across the entire table is a result of the highest-quality components, high-speed servo motors, and the exciting optional Dual Source and Camera Registration options.

And we're proud to say it is designed, engineered and built in the USA!

Feature Highlights

Designed with features that work together to provide you with great engraving and cutting quality and an economical price.
Full list of features can be found on the Legend Laser Series features page.

Radiance™ Higher Resolution Optics
Mini Helix Radiance Optics

No additional, expensive lens package needed for the highest resolution engraving (Mini 24/Helix).

Long-Life Lenses Rated to 500 Watts
Legend Mini Helix Lenses

Lenses that are rated to an incredibly high 500 watts and can last the life of the laser system.

Long-Life Steel Bearings
Mini and Helix Bearings System

Designed to last the life of the system without the inevitable wobble and replacement of plastic bearings.

Joystick Controls
Fusion Strong Metal Chassis

Drive the laser directly from the joystick controls located on the laser control panel.

Easy-Access, Drop-Down Door
Fusion Drop-Down Door

Front-access door features strong, hydraulic struts for easy access and stability.

Laser Dashboard™ Printer Driver
Zing print driver

User-friendly print driver allows you to control all of the laser's features from one interface.

True Ethernet Networking Capabilities
zing laser networking

All Epilog Zing laser systems come standard with a high-speed, 10 Base T-Ethernet connection as well as USB.

CO2 Waveguide Laser Tubes by Epilog
zing laser tube

All-metal tube design provides higher beam quality and longer life with low recharge costs.

Superior Chassis Strength
Fusion Strong Chassis

An incredibly strong, rigid chassis that can withstand the fastest laser head movement.

Optional Accessories

Designed with features that work together to provide you with great engraving and cutting quality and an economical price.

Legend Rotary Attachment

Dual Source Option: CO2 and Fiber

Add the fiber laser's metal etching capabilities to the CO2 laser's versatility.

Are you looking for the ability to directly etch metals in addition to the material versatility of the CO2 laser? Add on the dual source option to your Fusion M2 32 and choose a CO2 laser (50, 60, or 75 watts) and add on a fiber laser (20, 30 or 50 watts) to work with a wider range of materials. 

Legend Rotary Attachment

Epilog eView Camera Module

Add laser cutting to your printed projects with our unique three camera design.

The easiest, most precise method of cutting printed graphics on wood, cardboard, acrylic, paper, and more. Simply add registration marks to your printed graphic and produce precise laser cuts. The eView features three cameras located inside the system to increase cutting accuracy, including two built into the lid for the easiest positioning of projects.

Legend Rotary Attachment

Fusion Rim-Drive Rotary Attachment

The Standard Rim-Drive Rotary Attachment allows you to engrave wine bottles, mugs, glasses and more.

Available for the Fusion Laser, the Standard Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item up to 10.25" (260 mm) in diameter. The Fusion Laser rotary attachment has been built to accommodate a large variety of shapes and sizes. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser!

Legend Rotary Attachment

Fusion 3-Jaw Chuck Rotary Attachment

When more precision is required, the 3-Jaw Chuck Rotary Attachment is the ideal choice.

Only available for the Fusion Laser, the 3-Jaw Chuck mechanically clamps a cylinder or oddly-shaped, non-cylindrical item place as the laser engraves.

The Fusion Laser rotary attachment has been built to accommodate a large variety of shapes and sizes. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser!
Legend Rotary Attachment

Vector Cutting Table

Raises laser cut materials off the table for better edges.

Incorporate the gridded cutting table on your Fusion laser system when cutting through materials. By raising the materials when cutting off the table, you'll be able to reduce the back-side burning on the material.

Legend Rotary Attachment

PhotoLaser Plus Software

Photo processing software that optimizes your photographs for engraving on a variety of materials.

PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials.

Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers?

Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.

Legend Rotary Attachment

Optional Lenses

In addition to the 2.0" lens (or 3.0" lens on the dual source), we offer special lenses for specific applications.

1.5" Lens: Highest-Resolution Engraving

Although the standard 2.0 inch lens provides amazing detail, our 1.5-inch lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts.

4.0" Lens: Cutting Thicker Materials and Inside Deep Areas

The 4.0 inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.

Cone Lens: Deep Cutting with the Laser

The Cone design pushes the stream from the Air Assist down directly through the cut, rather than over the surface of the engraving material. This provides even better reduction of laser flare-ups and better edge quality.

Legend Rotary Attachment

Vector Pin Table

Raise and support your cutting materials for better edge quality.

The Pin Table incorporates movable pins that can be placed anywhere along the table's grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handy removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.

Legend Rotary Attachment

Air Compressor

Blows a constant stream of air on the cutting area.

Epilog's optional Air Compressor is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area.

This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

Epilog Fusion M2 32
Technical specifications

Detailed Information

Epilog Fusion M2 32
Engraving Area 32" x 20" (812 x 508 mm)
Maximum Material Thickness 13.25" (336 mm)
Laser Wattage CO2: 30, 40, 50, 60, 75 or 120 watts
Fiber: 20, 30, or 50 watts

Dual source: CO2 50, 60, or 75 watts; 
Fiber 20, 30, or 50 watts
Laser Source State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory Capacity Multiple file storage up to 128 MB.
Air Assist Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer on Epilog's Legend Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Legend Series Lasers.
Operating Modes Optimized raster, vector or combined modes.
Motion Control System High-speed Brushless DC Servo Motors.
X-Axis Bearings Ground and polished stainless steel Long-Lasting Bearing System.
Belts Kevlar (x-axis) and Steel Cord (y-axis) belts.
Resolution User controlled from 75 to 1200 dpi.
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.
Size (W x D x H) 52.5" x 34.88" x 40.75" (1334 x 886 x 1035 mm)
Weight 500 lbs (227 kg)
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Maximum Table Weight Fusion 32/40: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
Ventilation System 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4" (102 mm) in diameter.

Laser Sample Portfolio

Creating unique laser engraved items is easy with an Epilog Laser System. Whether your working with wood, acrylic, plastic, marble, fabric, metal or any other material you can use an Epilog Laser system to etch intricate designs into your materials with ease

Contact Us

Call Us
(714) 540-2233
2950 Airway Ave, Unit D-1
Costa Mesa, CA 92626